Project progress
Hatch cover service for M/V ARTVIN

Project Name:

Hatch cover service for M/V ARTVIN

Project Start Time:

2024-06-24 12:15

Decoration style:

othere

Project description:

Received the notice from the shipowners, the hatch cover needs to be repaired.

Progress:

Measure the clearance around the corner of the hatch cover and place the appropriate pad.

Measure the clearance around the corner of the hatch cover and place the appropriate pad.

Measurement the seam Measurement the middle seam（20mm） Adjusted 6mm iron block Adjusted iron block

Progress:

Apply powder around the hatch cover rubber strip, close the hatch cover press powder, and then open to check the press powder.

Apply powder around the hatch cover rubber strip, close the hatch cover press powder, and then open to check the press powder.

Be-powder the rubber of the hatch cover After closed hatch cover,opened hatch cover again and checked press powder Ultrasonic inspection

Progress:

Opened the cover,welding the adjusted iron block in advance and polish it, surfacing the middle seam.

Opened the cover,welding the adjusted iron block in advance and polish it, surfacing the middle seam.

Welding the iron block and polish it(+6mm) Surfacing the middle seam
 

Progress:

Job done

Job done

Finally the hatch cover was closed and the 7 hatch cover were checked for sealing by ultrasonic again to check that there was no leakage.

UT again(no leakage) Middle seam no leakage(12mm)